<-----  向左滑动显示详细信息

   墙体打印机在工作时应注意哪些事项？
在美丽乡村 的建设中，大家会发现很多农村的房子外墙上都画了一些生动盎然的彩画，那这些画都是手工画的吗，那工作量就太大了。其实在现代科技下，这些墙体画都是用墙体彩绘机画的。那么下面就来给大家讲解一下墙体彩绘机在工作时应注意哪些事项?


墙体打印机在工作时应注意哪些事项？


　　1、下雨天或即将要下雨时是不能施工的，有光栅的机器在风力过大时也要停止施工，因为风力过大会造成光栅摆动，从而会造成打印的图案出现错位;无光栅的机器受风力的影响小，但是风力太大时也要停止施工，因为风会把喷出来的墨吹散，造成画面模糊。


　　2、注意在机器的正上方有没有空调开启，不要让水滴下来落到机器上;在施工过程中注意机器上的各种线路是否会相互干扰、拉扯，在调整机器与墙面距离时注意喷头不要碰到墙面，以防撞坏喷头;注意水平的调整，平没有调整好会影响图片打印出来的效果。

　　3、在机器工作时尽量不要让无关的人员靠近，同时工作人员也要注意，防止无意中碰掉机器电源，造成机器断电带来不必要的麻烦;在昼夜温差过大的地区，每天在施工之前要打一副图来测试一下光栅是否正常，以免直接上墙造成不必要的麻烦和损失。

What should be paid attention to when the wall painting machine is working?
In the construction of beautiful countryside, we will find that many rural houses are painted with vivid and colorful paintings on the outer walls. Are these paintings hand-painted? That's too much work. In fact, under the modern technology, these wall paintings are painted with wall color drawing machine. So let's explain to you what should be paid attention to when the wall painting machine is working?
What should be paid attention to when the wall painting machine is working?
1. In rainy days or when it is about to rain, the construction of machines with grating shall be stopped when the wind is too strong, because the wind will swing the grating, which will cause the printed pattern to be misplaced; machines without grating will be less affected by the wind, but the construction shall also be stopped when the wind is too strong, because the wind will blow the ink out and make the picture fuzzy.
2. Pay attention to whether the air conditioner is turned on at the top of the machine, and do not let the water drop onto the machine; pay attention to whether various lines on the machine will interfere with each other and pull during the construction process, and pay attention to the nozzle not touching the wall when adjusting the distance between the machine and the wall, so as to avoid damaging the nozzle; pay attention to the adjustment of the level, and the adjustment of the level will affect the effect of printing pictures.
3. When the machine is working, try not to let irrelevant personnel near. At the same time, the staff should also pay attention to prevent inadvertently touching the power supply of the machine, causing unnecessary trouble due to the power failure of the machine. In the area where the temperature difference between day and night is too large, a picture should be made every day before the construction to test whether the grating is normal, so as to avoid unnecessary trouble and loss caused by directly going on the wall.